Choosing Kitchen Cabinets in Los Angeles

View PDF | Print View
by: lettirg23
Total views: 5
Word Count: 604
Date: Mon, 11 Apr 2011 Time: 8:04 AM

Custom Kitchen cabinets in Los Angeles offer a wide array of options when choosing cabinets for installation. Setting them up is not difficult, with helpful installation instructions from easy-to-understand manual guides, or professional help from experts in kitchen remodeling in Los Angeles. You can increase the functional and decorative value of your kitchen without having to spend too much.

Before purchasing kitchen cabinets in any Los Angeles home improvement stores, it is important to determine the dimensional measurements of the cabinets you wish to install. This will help you in narrowing down your options in purchasing kitchen cabinets in Los Angeles.

If you have any existing cabinets, remove the cabinet first and then remove all nails or screws in the wall. If the cabinet weight is too much for you to handle alone, have someone assist you in lifting.

The first installation step is to lay out the measurements with the use of a pencil. You have to mark a point 3 inches from the floor, from that point draw a straight line. Then mark a point 34 &half inches from the first point and draw a straight line from it. This will be the upper line of your base cabinet. Then mark a point and draw a straight line 19 ½ inches above the previous point. This is the top line of your wall cabinet. Afterwards, it's time to make use of your stud finder to mark the studs about 6 inches below the base line. You then have to draw a line between these points and set up the 1x3 inches rail to the wall as an alignment guide. Now you're ready to set up your wall cabinets starting on one end. In installing, drill a hole at the back of the cabinet first then attach the screws. Lastly, check the level to assure straight cabinet alignment on all dimensions.

Now it's time to set up the other wall cabinets, also make sure that they are properly aligned with the first attached cabinet. If you have a face-frame cabinet, drill two holes with a diameter of 1/8 inch on both sides of the frame and secure them by using screws. For frameless cabinets on the other hand, the holes are drilled through the shelf pin holes after which they are locked.

After the wall cabinets, it's about time to set up the base cabinets starting with the corner cabinet. You can use shims or wedges to make them level as desired. Before installing them, make sure first that the edges of the cabinet are aligned with the wall line.

Clamp the cabinets together to turn a corner. Make use of filler strips if you want to give the cabinet doors some space to move. Check alignment again and use shims as desired for optimal level and alignment. You then need to drill in the screws at the back of the cabinets and get rid of extra/ unnecessary elements.

Finally, join the base cabinets and check for level one last time. You now have a new and beautiful kitchen cabinet. Should you need further help, you can always seek expert assistance from Los Angeles kitchen cabinet installers.

Custom Kitchen cabinets in Los Angeles are among the most functional and beautifully designed cabinets that you can use to add character and style to your home. The wide array of options that offer serve to ensure that your needs and preferences will be met.

So don't waste time and take advantage of Custom kitchen cabinets in Los Angeles now.

About the Author

Brent Lettirg is an author of this article on Kitchen Cabinets. Know more about Kitchen Remodeling here.

Comments